Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Program memory [B]
Random function
1. Mon - Fri (Mo-Fr) 7:00 a.m. switch off
This enables you to give any external
(OFF)
observer the impression that you are
2. Sat - Sun (Sa-So) 9:00 a.m. switch off
constantly at home. The random
(OFF)
function uses an integrated random
generator to vary the times you set by
3. Mon - Fri (Mo-Fr) 8:00 p.m. switch on
between -15 minutes and +15 minutes
(ON)
every day.
4. Sat - Sun (Sa-So) 9:00 p.m. switch on
You can switch the random function on
(ON)
or off individually for each switching
Program memory [C] – timer
time.
The timer function factory setting is
For example:
15 min („Setting the timer start time",
Random time +9 min
p. 37).
Switching time 1: Switch off at 7:00
When you activate the required
a.m., random function on: The lighting
program memory, the switching times
is switched off at 7:09 a.m..
saved in it are executed in sequence.
Switching time 2: Switch on at 8:00
You can modify or delete the switching
p.m., random function off: The lighting
times in memories [A] and [B] as
is switched on at 8:00 p.m.
required, save additional switching
You can combine the astro function
times (up to a total of 18) (see „Setting
with the random generator for each
new switching times/modifying
individual switching time. Then this
switching times", p. 42) or delete them
switching time is adapted to the
(see „Deleting switching times", p. 45).
current sunrise or sunset time, and
Setting a switching time includes:
then extra variation is added by the
– the time switch switching
random generator.
behaviour (switching on or off)
Astro function
– the start time (to the minute)
The astro function means that your
– the day of the week (one, several
lighting can be switched on or off at the
or all)
actual times of sunrise or sunset, rather
– random function on or off
than at a pre-set switching time. The
– astro function on or off
time switch also contains an integrated
During a reset, the set switching times
astronomical calendar that calculates
are deleted and reset to the default
the sunrise and sunset for every day of
values.
the year.
Random function
31
Astro time shift
Likewise, when the time switch has
calculated that at a switching-off time
set for the astro function it will still be
3
light outside, the lighting will only be
4
switched on at the actual time of
5
sunset.
6
Other switching times set for daylight
hours are not affected by the astro
7
function.
8
9
15
4
5
16
6
7
17
8
9
18
10
19
15
16
20
17
18
21
19
1
2
3
4
5
6
7
8
9
10
11
12
20
21
Fig. 2: Astronomical calendar for
sunrise and sunset
Fig. 3: Astro function (application)
You can switch the astro function on or
Astro time shift
off individually for each switching time.
The integrated astronomical calendar is
On astro function, when the time
designed for the centre of the CET time
switch calculates that at a certain
zone. To adapt the astro function to
switching-on time it will still be dark
your longitudinal location, individually
outside, the lighting will not be
and to the second, you can use the
switched off until the actual moment of
astro time shift to correct the astro
sunrise.
times calculated by the time switch, by
± 1:59 hrs. (see „Programming the
astro time shift", p. 46).
32
Programmed
OFF time 6:30
Executed
OFF time
Executed
ON time
Programmed
ON time 7:10 p.m.
1
2
3
4
5
6
7
8
9
10 11
12
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
