Setting The Timer Start Time; Toggling Summer Time/Winter Time - merten 5800 Gebrauchsanleitung

Setting the timer start time

Prog Zufall Astro
The timer start time is pre-set to
A
15 min..
Uhr 1 Press [Mode] until program
OFF W
Dat.
2 x Mode
2 x Mode
Prog Zufall Astro
ON
Fig. 7: Timer function
Uhr The last start time that was set on the
OFF
Dat.
timer appears (e.g. 15 min, Fig. 5).
EIN
2 Hold down (for at least 1 s) [EIN]
– [EIN] (ON) = increase start time
Prog Zufall Astro
– [AUS] (OFF) = reduce start time
ON
The timer start time initially changes in
steps of one minute. These steps
Uhr
Dat.
become longer, the longer the button is
pressed down.
When you have set the desired timer
start time:
AUS
3 Press and hold down the [Mode]
The timer start time flashes. When the
display stops flashing and lights
steadily, the new timer start time has
been saved and you can release the
[Mode] button.
Fig. 6: Switching on lighting with the
|
timer function
Setting the timer start time
memory [C] flashes in the display.
Prog Zufall Astro
ON
Uhr
Dat.
(ON) or [AUS] (OFF) to set the
desired timer start time (00:01–
23:59):
button for at least 3 seconds.
Note: Switching times will not
be implemented while you are
setting the timer start time.
37

Toggling summer time/winter time

Toggling summer time/
winter time
You can change the time on the device
to summer or winter time.
1 Briefly press the [Set] button to
toggle between:
– Winter time W
– Summer time S
Prog Zufall Astro
Set
Uhr
OFF W
Dat.
Prog Zufall Astro
Set
Uhr
OFF S
Dat.
Fig. 8: Toggling summer time/winter
time
38