merten 5800 Gebrauchsanleitung Seite 23

Setting new switching times/modifying switching times
4 Press [EIN] (ON) or [AUS] (OFF) to
You can set new switching times (max.
18) or modify previously saved
switching times (for how to delete
them, see „Deleting switching times",
p. 45).
5 To confirm the memory slot, press
If the same time on the same day of
the week is set for both an "on" time
You can now modify the saved
and an "off" time, the switching-off time
switching time, or set a new switching
is the one that is executed.
time in the empty memory slot.
Activating set mode
Setting loads On or Off
1 Press and hold the [Set] button until
6 Press [EIN] (ON) or [AUS] (OFF) to
prog appears in the display.
The device is now in set mode. The
"Set date and time" lights flash on the
7 To confirm, press [Set].
display.
Selecting the program memory
2 Press [EIN] (ON) or [AUS] (OFF)
until the symbol for the required
program memory [A] or [B] flashes.
3 To confirm, press [Set].
Fig. 18: Switching a load on or off
The switching time set mode is now
Setting the time
active.
8 Press [EIN] (ON) or [AUS] (OFF) to
Selecting a switching time
If switching times have already been
saved in this program memory, the first
9 To confirm, press [Set].
is now shown, and flashes. Otherwise
– – : – – is shown (empty memory slot).
Prog Zufall Astro
Mo
A
Di
Mi
Do
Fr
Uhr
Sa
So
Dat.
Fig. 19: Setting the hour
Fig. 17: Empty memory slot
0 Press [EIN] (ON) or [AUS] (OFF) to
^ To confirm, press [Set].
scroll between the saved switching
times and select the one you
require.
[Set].
set the load to be switched ON or
OFF at the relevant time.
Prog Zufall Astro
ON
A
Uhr
Dat.
set the time in hours when the
lighting should be switched.
Prog Zufall Astro
A ON
Uhr
Dat.
set the time in minutes.
43
Setting new switching times/modifying switching times
Switching on the random function
You can determine whether or not the
Prog Zufall Astro
ON
A
random function should be activated
for this switching time (see „Random
function", p. 31).
Uhr
Dat.
Fig. 20: Setting the minutes
Setting the day(s) of the week
You can also set on which day(s) of the
week the switching time should be
executed.
. Press [EIN] (ON) or [AUS] (OFF) to
Each active day of the week is
represented by a small bar.
Bar shown = Switching time will be
- To confirm, press [Set].
carried out on this day.
Bar hidden = Switching time will not
be carried out on this day.
A flashing frame around a bar shows
that you can now select or deselect this
day of the week.
Fig. 22: Activating the random function
< Press [EIN] (ON) or [AUS] (OFF) to
Switching on the astro function
move this selection frame.
You can set whether or not the astro
+ Press the [Mode] button to select
function should be switched on for this
or deselect the day marked by the
switching time (see „Astro function",
frame.
p. 31).
# Symbol (see Fig. 23) displayed =
When you have finished selecting or
deselecting days:
, To confirm, press [Set].
Prog Zufall Astro
ON Mo
A
[ Press [EIN] (ON) or [AUS] (OFF) to
Di
Mi
Do
Fr
Uhr Sa
{ To confirm, press [Set].
Dat. So
Fig. 21: Choosing days of the week
44
If the symbol (see Fig. 22) is shown,
the random function is currently
switched on
If the symbol is flashing, it means
the random function is switched off
switch the random function on or
off.
Prog Zufall Astro
ON
A
Uhr
Dat.
astro function is currently switched
on
ISymbol flashing = astro function is
switched off
switch the astro function on or off.