Herunterladen Inhalt Inhalt Diese Seite drucken

How Set Mode Works; Setting The Time And Date - merten 5800 Gebrauchsanleitung

Zeitschaltuhr
Vorschau ausblenden Andere Handbücher für 5800:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

How set mode works

Prog Zufall Astro
A
Uhr
Dat.
OFF W
Set
Prog Zufall Astro
Uhr
Dat.
EIN
AUS
Prog Zufall Astro
Setting the
twilight value
Uhr
Dat.
EIN
AUS
Set
Prog Zufall Astro
Shifting astro
times
Uhr
Dat.
Set
Fig. 9: Set mode
|
Note: The "Set twilight value"
menu item can only be seen and
selected if a sun/twilight sensor
is connected to the device.
How set mode works
Setting the
time and date
Set
EIN
AUS
Prog Zufall Astro
A
Programming
memory A
Uhr
Dat.
EIN
AUS
Set
Prog Zufall Astro
Programming
B
memory B
Uhr
Dat.
Set
39

Setting the time and date

All functions can be selected and
You can exit set mode at any time by
adjusted as you require using set
pressing and holding the [Set] button
mode.
for about 3 sec. Any changes made up
to then will not be saved!
Set mode is operated with four
buttons:
Tip: You can select some values more
quickly by holding [EIN] (ON) and
– [Set] Open set mode, confirm a
[AUS] (OFF) down longer. After a short
selection
time, the values will start to change in
– [Mode] Select and deselect
larger steps.
various functions
– [EIN] (ON) Scroll forwards
Setting the time and date
– [AUS] (OFF) Scroll backwards
From the basic display (current time),
1 Press and hold the [Set] button until
press and hold the [Set] button until
prog appears in the display. The time
The device is now in set mode. The
switch is now in set mode for "Time/
"Set date and time" lights flash on the
Date" (flashing light next to "Uhr/Dat."
display.
(Time/Date)).
2 Press the [Set] button.
You can scroll back and forth between
3 Press [EIN] (ON) or [AUS] (OFF) to
the various setting options using the
[EIN] (ON) and [AUS] (OFF) buttons.
The corresponding symbol flashes in
the display.
4 To confirm, press [Set].
Press [Set] again when the setting you
want to change is shown. You can now
change the settings (see following
sections).
|
Note: If you do not press any
Uhr
button for 2 min in set mode, the
Dat.
device switches back to the
basic display. Any changes made
Fig. 10: Setting summer time/winter
up to then will be saved.
5 Press [EIN] (ON) or [AUS] (OFF) to
6 To confirm, press [Set].
40
prog appears in the display.
set summer time (S) or winter time
(W).
Prog
Zufall
Astro
Mo
Di
Mi
Do
Fr
Sa
W
So
time
set the current month (01–12).

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis