Setting The Twilight Function - merten 5800 Gebrauchsanleitung

-1 moves the astro times back one
Setting the twilight
hour
function
1 moves the astro times forward
one hour
This function can only be used with a
6 To confirm, press [Set].
time switch with sensor connection,
and only when a sun/twilight sensor is
Entering the time shift in minutes for
connected (see „How to complete the
sunset:
time switch", p. 29).
7 Press [EIN] (ON) or [AUS] (OFF) to
set the minutes (00–59) by which
the astro times should be moved
forward ("0") or back ("-0").
Saving the astro time shift
8 Press and hold [Set] until the basic
display (current time) is shown.
The astro time shift is now saved, and
will be automatically activated for all
switching times that use the astro
function.
The basic display (time) appears.
Fig. 25: Setting the twilight function
1 Press and hold the [Set] button until
The device is now in set mode. The
"Set date and time" lights flash on the
display.

Setting the twilight function

Prog Zufall Astro
A
Uhr
OFF W
Dat.
Set
EIN AUS
Twilight
function
Set
Twilight Setting the
EIN EIN
function ON/ twilight
AUS AUS
OFF value
On
Off
Set Set
prog appears in the display.
47
Setting the twilight function
2 Press [EIN] (ON) or [AUS] (OFF)
Setting the twilight value:
until the "Moon" symbol in the This display is only shown when you
display flashes or lights up steadily. have switched on the twilight function
in the previous step.
3 To confirm, press [Set].
The twilight function set mode is now
active.
Switching the twilight function on
and off:
Fig. 27: Setting the twilight value
Prog Zufall Astro
The display shows the brightness value
measured by the sensor (on the left)
Uhr
and the adjustable twilight value (right),
Dat.
which can be changed in increments of
Fig. 26: Setting the twilight function
one unit (00–99), empirical value
1 Press the [EIN] (ON) or [AUS] (OFF)
approx. 30.
buttons to switch the twilight
Tip: Wait one evening until you see the
function on or off: level of twilight that you want to set.
Then set the twilight value to the
– Moon symbol continuously
brightness value displayed.
displayed = Twilight function
Examples:
switched on
– Moon symbol flashing = Twilight
function switched off
2 To confirm the selection, press
[Set].
1 Press the [EIN] (ON) or [AUS] (OFF)
2 To confirm, press [Set].
Your settings are saved, and the basic
display (time) appears.
48
Prog Zufall Astro
Uhr
Dat.
Display Approx. lux value
00 6
10 17
30 50
50 80
70 135
90 220
98 300
buttons to adjust the twilight
function as required.