What You Can Do With The Time Switch; How To Complete The Time Switch; What You Should Know About The Time Switch; Operating And Display Elements - merten 5800 Gebrauchsanleitung

What you can do with the time switch

What you can do with the How to complete the time
time switch switch
The time switch (with/without sensor Unit can be completed with a time
connection) is mounted on a time switch insert or with an insert for time
switch insert. You can set the time switch with sensor connection, or with
switch to switch electrical loads such a frame that matches the switch
as lamps (see technical data for insert) design.
on and off at specific times. Using the
A sun /twilight sensor accessory
two extension inputs, you can also
(580691) is required if you wish to use
switch loads with mechanical push-
the twilight function on the time switch
buttons (make contacts).
with sensor connection.
Product features:
• Simple operation using four push-
buttons
• Two independent program memories
for a total of up to 18 switching times
• Switching times pre-set at the
factory, but can be changed later
• Reset (restore default settings)
• Toggle from summer to winter time
by pressing a button
• Timer function
• Random function
• Astro function (control by astronomic
pre-calculation of sunrise and
sunset)
• Adjustment of astro function by
individual astro time shift
• Power reserve and retention of set
switching times during power failure
• Can be operated with extension unit
Only for time switch with sensor
connection:
• Twilight function

What you should know about the time switch

What you should know
about the time switch

Operating and display elements

A B
F
A ON
B
G
C
H
Uhr
OFF
Dat.
I
J EIN
Mode
K
N O
Fig. 1: Operating and display
elements
Symbols in the display
A Connected load "Ein" (On) or "Aus"
(Off)
B Hours and minutes (flash if the time
has not yet been set)
C Set mode
D Random function
E Astro function
F Active program memory
G Timer function (on program
memory [C])
H Setting the time
I Setting the date
J Winter time
K Summer time
29 30
L Day of the week
M Twilight function
Push-buttons
N "Switch on" or
"Forward" (in set mode)
C DE
O "Mode"; selection and deselection
of various functions
Prog Zufall Astro
Mo
Di P "Set"; setting and confirming
L
Mi
Do
functions
Fr
Sa
W S
So
Q "Switch off" or
M
"Back" (in set mode)
AUS
Program memory and
Set
switching times
The time switch has three program
P Q
memories: [A], [B] and [C]. After
installation and reset, program
memories [A] and [B] feature standard
switching times, which can be altered
at any time. [C] includes the timer
function (see „Using the timer
function", p. 36). If none of these
memories is activated, the time switch
operates in manual mode.
Program memory [A]
1. Mon - Fri (Mo-Fr) 7:00 a.m. switch off
(OFF), astro function on
2. Sat - Sun (Sa-So) 9:00 a.m. switch off
(OFF), astro function on
3. Mon - Fri (Mo-Fr) 8:00 p.m. switch on
(ON), astro function on
4. Sat - Sun (Sa-So) 9:00 p.m. switch on
(ON), astro function on