Bluetooth Operations - Peiying PY-9398 Bedienungsanleitung

BLUETOOTH
1.Pairing connect.
Turn on car unit, put your mobile near the unit, activate your mobile bluetooth function.Soon the
phone will find the new bluetooth device "CAR AUDIO" . Input the pairing password "8888" and
clik OK. The phone will prompt the matching successful.When the pairing connect is successful,on
the LCD, it shows BT ON, and the bluetooth logo " "will stop blinking .Then you may perform the
bluetooth operation.
REMARK:depend on bluetooth mobile, the bluetooth system support "HSP" "HFP" "A2DP" and
AVRCP bluetooth profile.
2.Handsfree phone service
If your mobile phone have matched with the unit, you can dial calls out through your mobile
phone. It will turn to unit automatically when calling come in and the calling phone number will
indicate on the LCD screen.
-Press the "BAND" button shortly to accept the call .Then you can talk with the other party through
the mic on the panel.
-Press "MUTE" button shortly to reject the call when calling come in.
-Press "MUTE" button shortly to hang up after you finish the talk.
3.Advance Audio distributing profile(A2DP) playing.
Through mobile and unit A2DP connected, press "MODE" and turn to A2DP mode at the same
time, the music playing in mobile can turn to the unit audio system play. "A2DP" will display on
LCD.
-Press button " <<" and " >> " in the panel can select the music track.
-Press " PAUSE" button shortly to pause the music playing.
-Press "BAND"(mode) longly to temporarily discommect the bluetooth.
-Press "BAND"(mode) button longly again to reconnect the bluetooth.
4.Phone number book.
This bluetooth system can automatically store incoming call numbers, up to 10 phone numbers.
-Press "MUTE"(mode) button longly to enter the phone number book and press VOL button to
look up the phone number.
-Press "BAND" button once can call out you desired phone number.
5. Interrupt bluetooth connection/reconnection.
Pressing the "BAND" button shortly to interrupt the bluetooth connection when your are talking a
call and the voice can turn to mobile speaker.
Press "BAND" button again to reconnection.
NOTE:Different mobile phone have different responses.We do not guarantee all the
operation of connectable devices.
6. How to delete stored phone number?
The unit can store ten number of missed ,rejected and ANS separately, and the first number will
auto deleted when the 11th number calling
7.How to use "RECEIVED" "MISSED" "REJECTED" MANU
ANS/AUTO ANS" Functions.
Press MUTE" for 3 seconds to enter into "RECEIVED" "MISSED" "REJECTED" MANU ANS/AUTO
ANS". Turn VOL button for choosing the telephone number.
Owner's manual
EN
13