Indel B FM7 BACK Bedienungsanleitung Seite 29

G E N E R A L SA FE T Y WA R N I N G S
The Manufacturer is responsible for the safety, reliability and performance of the device, only if
the following conditions are met.
The device must be used in compliance with the instructions contained in this manual,
referring both to the safety precautions and the use of the device itself;
the installation and any operation of repair, modification and service must be done by
qualified personnel;
the electric system where the device is destined to must be compliant both to the IEC
requirements and to the local currently in force rules.
The Manufacturer reserves the right to deliver, after written request by authorized servicing
personnel, the following items: electric diagrams, component lists and any information related to
the single parts of the device, considered by the Manufacturer as able to be repaired.
Attention
The Manufacturer shall not be held responsible for personal or property damages
deriving from the conditions indicated below:
• improper installation or connection;
• damages the device, due to external mechanical effects or overvoltage;
• changes to the device without the Manufacturer's express written consent;
• use and maintenance, not compliant with the contents of this manual, for uses different
from the ones described in the paragraph Intended use, and the lack of adoption by the
user of all cautions, measures and safety standards necessary to prevent any prejudice.
Attention
Strictly follow the indications given below:
• Do not operate the device if its structure or the cooling circuit is visibly damaged.
• The operators that are not able to safely use the device due to their physical, sensory or mental
capacities, or to their poor experience or knowledge must not use the device, unless a person
responsible for them is present. Otherwise, they must follow the indications of this person.
• Install the device in a dry place protected by water jets.
• Do not install the device next to heat sources like: heating elements, intense exposure to
sunlight, electric ovens and gas ovens.
• Do not obstruct ventilation grilles.
• Do not store corrosive substances or solvents in the device.
• Do not store explosive substances, such as spray cans, containing propellent gases.
• Before operating the device, make sure that voltage in the battery corresponds to the
operating value.
• If the power supply cable is damaged, immediately replace it with a cable having the same
technical specifications (cross-section, length, insulation).
• Do not touch the device with bare hands or wet hands, and having bare or wet feet.
• Do not insert screw drivers or other tools between the protections or the moving parts of
the device.
• Only skilled personnel must repair the device, so as to avoid high risks for the health of the
users. Contact the Manufacturer's After-Sales Service.
27