Cleaning And Maintenance - SOLAC CE4494 Gebrauchsanleitung

nozzle control (15) to the "Preheating" posi-
tion . Wait until the ON/OFF luminous indi-
cator (1) remains lit. Repeat these steps as
many times as necessary.
4 Set the steam nozzle control (15) to the "Clo-
sed" position when you have finished using it.
5 When you have finished, clean away any
waste matter that may have got inside it. To
do this: Place an empty container below the
steam nozzle and open the steam nozzle con-
trol (15) to allow steam to exit.
The maximum time for steam production is 2
minutes.
C- AUTO OFF
If, after 30 minutes, the machine is not used it
will switch itself off. All of the luminous indicators
will switch off.

ClEANING AND MAINTENANCE

Unplug the coffee maker from the mains.
Clean the tank and filter holder regularly
Do not use alcohol, solvents or abrasive pro-
ducts to clean the coffee maker or tray, just a
soft damp cloth.
If you use the steam nozzle to heat milk, clean
•
it as soon as possible for easy cleaning. Wait
for the steam nozzle to cool down and wipe it
with a damp cloth.
Every now and again, for more thorough cle-
•
aning of the steamer, proceed as follows: wait
until the steamer cools down and remove
the steam protector pulling it down. Wipe the
steamer spindle with a damp cloth and soap
the cylindrical part. Make sure that the small
hole at the top of the steamer is clean before
refitting the part.
Fit the steamer on its spindle again.
•
It is advisable to remove the water from the
cup-holder tray regularly.
limescale Removal
We recommend de-scaling the appliance
once a year using a special product for coffee
machines so as to maintain the coffee maker
in perfect condition. We recommend the Solac
de-scaling agent.
1 Follow the instructions that come with the
de-scaling product.
2 To flush out the circuits, fill the tank again with
water only, switch on the coffee maker, fit the
filter holder without coffee, and carry out all
the steps described in the 'Operation' section
twice. During this process, turn the steam
control (13) and release the steam for 1 minu-
te.
ANOMAlIES AND REPAIR
Take the appliance to an authorised technical
·
support service if problems arise. Do not try to
dismantle or repair without assistance, as this
may be dangerous. .
For EU product versions and/or in the case
that it is requested in your country:
ECOlOGY AND RECYClABIlITY OF
THE PRODUCT
The materials of which the packaging of this
•
appliance consists are included in a collec-
tion, classification and recycling system.
Should you wish to dispose of them, use the
appropriate public containers for each type of
material.
The product does not contain concentrations
•
of substances that could be considered harm-
ful to the environment
This symbol means that in case you wish to
dispose of the product once its working life has
ended, take it to an authorised waste agent for
the selective collection of waste electrical and
electronic equipment (WEEE)
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU
on Electromagnetic Compatibility, Directive
2011/65/EU on the restrictions of the use of
certain hazardous substances in electrical and
electronic equipment and Directive 2009/125/
EC on the ecodesign requirements for ener-
gy-related products.
12
EN