General Safety Instructions; Inserting Battery - LaserLiner MetricMaster Plus Bedienungsanleitung

Completely read through the operating instructions, the
"Warranty and Additional Information" booklet as well as
!
the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed
on together with the device.
Function / application
Digital calliper gauge for precise measurement of lengths
– Functions: External measurement, internal measurement, depth
measurement, differential measurement through zero position,
level measurement
– Fixation of the determined measuring range by means
of clamping screw
– 5-digit display
– Measurement range: 0 ... 150 mm

General safety instructions

– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The device and its accessories are not toys.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– Risk of damage! The measuring surfaces may scratch sensitive
material.
– Risk of cuts! The measuring surfaces are sharp and pointed and
may cause injuries – only hold them using the handles provided.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards
or interference or be subject to hazards or interference.
1

Inserting battery

Open the battery compart-
ment and insert battery (1x
LR44 button cell) according
to the symbols. Be sure to
pay attention to polarity.
06
EN
2.
1.