Quick Start - NEC MultiSync XV17 Handbuch

Quick start

Quick start
The following chart summarises the connection process for the
MultiSync XV series monitor.
For more details please turn to the following pages if you are connecting
to an IBM compatible, Macintosh or compatible or other system.
Is the computer a Macintosh II
or LC Computer?
No
Set the Sync. switch (on the rear of
the monitor) to the ON Position.
Attach the signal cable of the monitor
to the video board.
Connect the power cord of the moni-
tor to the power outlet and to the mo-
nitor itself.
Turn monitor and computer on.
If necessary, use the OSM controls
for personal preference of the image.
Is the image correct?
Yes
Enjoy your monitor.
Use the optional MultiSync Mac
Yes
adapter to attach the monitors si-
gnal cable to the Macintosh II
video output.
If you have a Powerbook160, 65c,
180, 180c MacLCIII, Mac Centris
660AV, or Mac Quadra 840 Avp,
please make sure the Sync. switch
is in the ON position. All other Mac
Systems require the Sync. Switch to
be in the OFF position.
See the Trouble Shooting section
No
Problem solved?
Yes
Call your NEC-Dealer
E-7
No