Factory Preset - NEC MultiSync XV17 Handbuch

E-22

Factory Preset

Selecting Factory Preset allows you to reset all OSM settings back to
the factory settings. The following warning statement will appear to
confirm that you do want to reset ALL settings. Individual settings can
be reset by highlighting the control to be reset and pressing the reset
button.
Self Test
To make sure, that your monitor is working well, you can choose the
Self Test function in the following way:
Power down your monitor and your PC. Disconnect the video cable
from you PC or video card. Power on the monitor. While the Exit button
is held down, press the Proceed button. The following picture is shown
on the monitor. If you do not press the Exit button to cancel the Self
Test function, the monitor will show a dark screen within 20 seconds.
WARNING
ABOUT TO RESET
ALL SETTINGS
Press:
RESET - Reset
EXIT - Cancel
Self Test Menu
EXIT - Cancel
OSM Menus