Carrier 40SQM serie Installationsanweisung Seite 7

40SQM---
Warnings: avoid...
... exposure to oil vapours.
... installation in areas with high frequency waves.
... inclined installation which could cause dripping.
... horizontal sections or curves of condensate drain piping with less
than 5% slope.
... slack on electrical connections.
... disconnecting refrigerant connections after installation: this
will cause refrigerant leaks.
... connecting condensate piping to sewage system drain without
appropriate trap. Trap height must be calculated according to the
unit discharge head in order to allow sufficient and continuous
water evacuation.
... only partial insulation of the piping.
... flattening or kinking the refrigerant pipes or condensate pipes.
5
... excessive height difference between outdoor and indoor units
(see installation manual of outdoor unit).
... unnecessary turns and bends in connection pipes (see
installation manual of outdoor unit).
Excessive connection pipe length (see installation manual of
outdoor unit).
E N G L I S H
GB - 5