Setting And Changing The Optional Cards - Panasonic AW-E860L Bedienungsanleitung

Setting and changing the optional cards

< Optional Card Setting Sub Menu
This sub menu appears when a studio card (AW-PB305 or
AW-PB506) has been inserted into the optional card slot.
1 –––––
2 ––––––
3 –––––
4 –––––
1. Zebra Indicator Setting [Zebra: OFF, ON]
This is used to select whether to display the zebra pattern
on the viewfinder.
OFF: The zebra pattern is not displayed on the
viewfinder.
ON: The zebra pattern is displayed on the viewfinder.
2. Zebra Level Setting [Level: 70% to 110%]
This enables the zebra pattern to be displayed so that it
will provide as a general guideline for the luminance level.
It can be set when "ON" has been selected as the
zebra indicator setting.
3. Safety Zone Setting [Safety Zone: OFF, 1, 2, 3, 4, 5]
This is used to select the type of safety zone which is
displayed on the viewfinder. A safety zone is not
displayed when "OFF" is selected.
The safety zone and centre marker indicate electrical
positions and, as such, they may be at variance with
their optical positions.
1
4
The inside and outside frames denote safety zones of about
90% and about 95%, respectively.
4. EVF Output Setting [EVF Output: Y, CVBS]
This is used to set the signals to be output to the
viewfinder.
Y: The luminance signal is output to the viewfinder.
CVBS: The colour signals are output to the viewfinder.
When "CVBS" has been selected as the setting, the
zebra pattern will not be displayed on the viewfinder.
- 50 (E) -
2
3
5