Panasonic AW-E860L Bedienungsanleitung Seite 12

Major operating controls and their functions
< I/F Remote connector (I/F REMOTE)
Input terminal dedicated to control signals from the
optional remote control box (RCB) (WV-CB700A, etc.)
and the RCU (WV-RC700A, WV-RC550, etc.) and the
camera pan/tilt unit (AW-PH400, etc.).
• WV-CB700A is connected through the optional RCB
cable (AW-CA50T10/AW-CA50B10).
• WV-RC700A/WV-RC550 is connected through the
optional RCU cable (AW-CA50A26).
• AW-CB400 is connected through the optional camera
control cable (AW-CA50T8).
= Power indicator
Red LED lamp lights to indicate that the specified DC
power is supplied to the camera.
> DC 12 V input connector (DC 12V IN)
12 V DC is supplied through the DC power supply cable
(DC cable with ø6.5 plug supplied with AW-PS505A).
(Recommended AC adapter: AW-PS505A)
Cautions
1. Connect this to a DC 12 V class 2 power supply only.
2. To prevent fire or shock, the UL listed wire
VW-1, style 1007 should be used as for the cable for
DC 12 V input connector.
? Cable clamp
Clamp the DC power supply cable connected to the DC
12 V input connector to prevent it from slipping out.
@ G/L input connector (G/L IN)
Signals synchronized with the reference signal are to be
supplied to this connector when the camera is to be
synchronized with the reference signal BB.
A Optional card slot
Slot for inserting an optional card. For details, refer to the
manual for optional cards.
- 11 (E) -