Air Conditioner Features; Control Panel; Operating Instructions - Electrolux EXP26U338CW Benutzerhandbuch

14 www.electrolux.com

6. AIR CONDITIONER FEATURES

6.1 CONTROL PANEL

1
Displays temperature/time
2
Power ON/OFF
3
Filter Reset
4
Fan Speed
5
Adjust Temperature or Timer

7. OPERATING INSTRUCTIONS

Some of the following instructions
can only be used by using the
Control Panel.
7.1 Usage of the Control Panel
Heating mode (on some models)
In this mode the exhaust adaptor hose
MUST be used.
1. Press the "mode" button until the "Heat"
indicator is lit.
2. Press the "fan speed" button to
choose the fan speed according
to the illumination of the fan speed
indicator. You can choose the
fan speed as following sequence:
"auto" → "hi" → "med" → "low" → "auto".
3. Press the " " or " " button to choose
the temperature you want.
4. Connected drain hose. See 7.4
Drainage section.
6
Mode Selection
7
Sleep
8
Timer
9
Swing
Cooling mode
In this mode the exhaust adaptor hose
MUST be used.
1. Press the "mode" button until the Cool
mode indicator is lit.
2. Press the "fan speed" button to
choose the fan speed according
to the illumination of the fan speed
indicator. You can choose the
fan speed as following sequence:
"auto" → "hi" → "med" → "low" → "auto".
3. Press the " " or " " button to choose
the temperature you want.
It is not necessary to use the
drainage hose in the "cool" mode.
Dry mode
Press the "mode" button until the Dry
mode indicator is lit. The screen displays
the room temperature.
At the same time, the "low" fan indicator
lights.
Note: In this mode, fan speed cannot
be selected.