Electrical Connection; Getting To Know Your Appliance - Siemens ki24fa60 Gebrauchsanleitung

en

Electrical connection

The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220–240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be fused with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type match
the values of your mains supply match
the values of the mains supply. This
information can be found on the rating
plate. Fig. 1
ã=
Warning
Never connect the appliance
to electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used
for photovoltaic systems which
are connected directly to the national
grid. Sine-controlled inverters must be
used for isolated applications (e.g. on
ships or in mountain lodges) which are
not connected directly to the national
grid.
28
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. 1
* Not all models.
1-6 Controls
7 Light switch
8 Light
9 Glass shelf in the refrigerator
compartment
10 "Cool-fresh" container
11 Humidity filter
12 Humidity container
13 Egg rack
14 Butter and cheese compartment *
15 Shelf for tubes and small tins
16 Shelf for large bottles
A Freezer section
B Refrigerator compartment
C Cool-fresh compartment