Setting Up - Siemens KG36NHI32 Gebrauchsanleitung

Notes
Please observe the safety
■
information in this instruction manual
and ensure that this is still adhered
to, even if you operate the appliance
via the Home Connect app and are
not at home when doing so.
~ "Safety instructions" on page 29
Follow the instructions in the Home
Connect app as well.
Operation on the appliance always
■
has priority. During this time, it is not
possible to operate the appliance
using the Home Connect app.
Setting up Home Connect
Notes
After switching on the appliance,
■
wait at least two minutes until
internal device initialisation is
complete. Only then start setting up
Home Connect.
To implement settings with Home
■
Connect, theHome Connect app
must be installed on your mobile
device.
Observe the supplied Home
Connect documents for this.
Follow the steps specified by the
app to implement the settings.
The Home Connect menu will close
■
automatically when the appliance is
not operated for a lengthy period of
time. You can find information on
how to open the Home Connect
menu at the start of the appropriate
section.
Automatic connection with the home
network (WLAN)
If a WLAN router withWPS function is
available, the refrigerator can
automatically connect to the home
network.
Press the "alarm" button.
1.
The refrigerator compartment
temperature display shows Cn.
Press refrigerator compartment
2.
select button.
Press + button until the refrigerator
3.
compartment temperature display
shows AC and the freezer
compartment temperature display
shows OF.
Press freezer compartment select
4.
button.
Press the + button.
5.
The appliance is ready for automatic
connection.
The energy saving mode display
flashes.
The freezer compartment
temperature display shows an
animation for 2 minutes.
The appliance is ready for automatic
connection for as long as the
animation is displayed.
Within those 2 minutes, activate the
6.
WPS function on the home network
router (e.g. using the
WPS/WLANbutton; observe
information on this topic in the router
documentation).
If the connection is successful, the
freezer compartment temperature
display shows On and the energy
saving mode display lights up.
The refrigerator is ready to connect
with the app.
If the freezer compartment
Note:
temperature display shows OF, no
connection could be established.
Check whether the refrigerator is
1.
located within the range of the home
network (WLAN).
Repeat the process or establish the
2.
connection manually.
Home Connect en
39