Concept VS5010 Bedienungsanleitung Seite 20

• Do not use the appliance if the power supply cable or the mains socket plug is damaged; have the defect repaired
immediately by an authorised service centre.
• Do not use the appliance if it does not operate properly, or if it has been dropped, damaged or submerged in liquid.
Take the appliance to an authorised service centre for testing and repair.
• Never use the appliance outdoors.
• The appliance is intended for household use only, not for commercial use.
• Do not touch the appliance with wet or damp hands.
• Do not immerse the supply cable, the plug, or the appliance itself in water or any other liquid.
• Do not repair the appliance yourself. Contact an authorised service centre instead.
Failure to follow the manufacturer's instructions may lead to refusal of warranty repair.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
PRODUCT DESCRIPTION
1. Front cover grid
2. Propeller
3. Grid nut
4. Rear cover grid
5. Mode selector
6. Device body
7. Oscillation selector
8. Supply cable
9. Clamping band
MOUNTING
CAUTION!
Pull the power cord out of the socket before assembly or disassembly.
The fan can only be used with the front (1) and rear (4) grids fixed.
Never use the fan without cover grids.
1. Put the rear cover grid (4) on the driving unit so that the pins on the unit fit in the openings
on the grid. Fix it with the fitting nut (3).
18
1 2
9
3 4
5
EN
6
7
8
VS5010