Digital Tele Mode; Sequence Mode - Olympus C-100 Kurzanleitung

I

DIGITAL TELE MODE

This mode enables you to enlarge the image digitally to magnifications 1.6×,
2×, 3.2× and 4×.
1
Open the lens barrier and press the
2
The magnification changes in the sequence [1.6× → 2.0× → 3.2× →
4.0×] each time the
The magnification changes in the sequence [3.2× → 2.0× → 1.6× → No
display (1.0)] each time the
3
Take the picture.
· Press the
mode.
· When the magnification is set to 3.2× or 4×, set the Quality mode to
SQ2.
Note
• Press the
• The pictures taken in Digital Tele mode may become coarser.
I

SEQUENCE MODE

1
Open the lens barrier and press the
2
Select [CAMERA] from the Camera menu screen using the
buttons, and press the
3
Select [DRIVE] using the
4
Select [
button.
Sequence mode is now set. Press the
5
Press the Shutter button and keep it pressed.
Picture-taking will continue while the Shutter button is pressed and stop
when the button is released.
To return to normal recording mode, close the lens barrier and then reopen
it.
14
En
button is pressed.
button to turn the monitor off and cancel the Digital Tele
button to turn the monitor off and cancel Digital Tele mode.
button.
/
SEQUENCE] using the
or button.
button is pressed.
button.
buttons, and press the
/ buttons and press the
button again to exit the menu.
/
button.