Regulation Of Pressure / Water Volume; Fields Of Application And Working Methods; General; Detergent And Foam - Berner BHPC 150-1 4-in-1 Lance Betriebsanleitung

5.8 Regulation of pressure /
water volume
6 Fields of application and working
methods

6.1 General

6.1.1 Detergent and foam

6.1.2 Mechanical effect

Original Instructions
Separate detergent container
1. Remove the cover with suc-
tion hose from the detergent
container.
2. Mount the cover with suction
hose on the separate deter-
gent container.
Effi cient high presure cleaning is achieved by following a few guide-
lines, combined with your own personal experience of specifi c
cleaning tasks. Accessories and detergents, when correctly cho-
sen, can increase the effi ciency of your pressure washer. Here is
some basic information about cleaning.
Foam or detergent should be applied onto dry surfaces so that the
chemical product is in direct contact with the dirt. Detergents are
applied from bottom to top, for example on a car bodywork, in order
to avoid "super clean" areas, where the detergent collects in higher
concentration and streams downwards. Let the detergent work for
several minutes before rinsing but never let it dry on the surface be-
ing cleaned. Note: It is important that the detergents do not dry up.
Otherwise the surfac that has to be cleaned can be da maged.
In order to break down tough layers of dirt, additional mechanical
effect may be required. Special wash brushes offer this supplemen-
tary effect that cuts through dirt (especially by car washing).
BHPC 150-1 4-in-1 Lance
The cover has a standard thread
and fi ts common detergent con-
tainers. If your container does
not have a standard thread,
detach the fi lter from the suc-
tion hose and remove the cover.
Remount the fi lter in the suction
hose.
Extra detergent hose can be
pulled out of the machine.
Working pressure and water
volume can be regulated on the
machine by turning the button
for regulation of pressure / wa-
ter volume (5).
DE
EN
FR
IT
ES
NL
DA
NO
SV
FI
PT
37