Berner BHPC 150-1 4-in-1 Lance Betriebsanleitung Seite 28

BHPC 150-1 4-in-1 Lance
• Wear shoes with non-slip soles.
DE
• Wear goggles, ear protection and protective clothes
EN
FR
 Transporting the high pressure washer
• When transporting the machine in or on a vehicle, it
IT
ES
• BERNER recommends that the machine is positioned
NL
DA
NO
Detergents
• This machine has been designed for use with clean-
SV
FI
PT
 
Before starting the work
Inspecting the machine
• Do not use the machine if a supply cord or important
• The trigger of the spray handle must move easily and
• Always keep high pressure hose and spray attach-
Electrical connection
Minimize the risk for electrical shock:
• Voltage and frequency of the machine (see rating
• Only connect the machine to electrical installation
28
during operation.
must be secured, e.g. with straps, so that it cannot slip
or tip over.
horizontally on the backside, when transported in or
on a vehicle.
ing agents supplied or recommended by BERNER.
The use of other cleaning agents or chemicals may
adversely affect the function of the machine.
parts of the machine are damaged, e.g., safety de-
vice, high pressure hose, and spray handle and spray
attachments.
automatically return to its starting position when re-
leased.
ment in good condition (clean, moving easily) and cor-
rectly assembled.
plate) must match the voltage of and frequency of the
mains supply.
made by a certifi ed electrician and com ply with IEC
WARNING!
Original instructions