ABB Orion1 Extended Bedienungsanleitung Seite 12

Receiver
AOPD mode
Not aligned
FIRST aligned
Alignment LAST aligned
Minimum alignment
signal level
Maximum alignment
signal level
Interlock
Normal operation Free beams
Manual Reset Only
Interlock
Interrupted beams
OSSD ON
(maximum alignment)
OSSD OFF
Code 1
OSSD OFF
Code 2
OSSD OFF
No code
Normal operation
Signal level on the
beams
EDM activated
2TLC172296M0201 Rev A
2015-03-20
Status
LEVEL
LED configuration
None
Insufficient
Low
Good
Best
12
Action
See the instruction manual
paragraph "Alignment
procedure".
See the instruction manual
paragraph "Alignment
procedure".
See the instruction manual
paragraph "Alignment
procedure".
See the instruction manual
paragraph "Alignment
procedure".
See the instruction manual
paragraph "Alignment
procedure".
AOPD waiting for Reset.
Push the RESET button.
Free the detection zone and
push the RESET button.
www.abb.com/jokabsafety