ABB Orion1 Extended Bedienungsanleitung Seite 13

Receiver
AOPD mode
Valid Blanking
(OSSDs ON)
Invalid blanking
Normal operation
(OSSDs OFF)
Blanking only
BCM tolerance active
Muting Active
Override Active
Override attention
Normal operation
status
Muting only
Override timing error
Lamp error
2TLC172296M0201 Rev A
2015-03-20
Status
LED configuration
13
Action
Blanking zones not respected.
Reconfigure blanking (teach-
in).
Check the effective resolution
of the AOPD and if the
tolerance function should be
activated.
If unexpected OSSD OFF with
muting active, check the
configuration of partial muting.
OSSD ON, muting lamp
flashing.
Push the OVERRIDE button to
force the OSSD outputs on.
Check and repeat the override
activation sequence.
Check the connections and the
wiring the override function.
Check the connections and the
wiring of the lamp and/or if the
lamp is broken.
www.abb.com/jokabsafety