Cleaning And Maintenance; Accessories And Replacement Parts - Beurer MP 62 Gebrauchsanweisung

When filing, always work from the outside of the nail towards the tip!
Always check results regularly during treatment. As soon as the application
becomes unpleasant, stop the treatment.

8. Cleaning and maintenance

Before cleaning the power unit, always unplug it from the socket outlet!
– Clean the instrument with a slightly moistened cloth. You can also moisten the
cloth with mild soap suds to remove more stubborn dirt.
– If necessary, for reasons of hygiene, the attachments can be cleaned with a
cloth or brush moistened with alcohol. Dry them carefully afterwards.
– Do not drop the instrument.
– Make sure that no water enters the instrument. But if this should happen, do
not use the instrument again until it is completely dry.
– Do not use chemical detergent or scouring agents for cleaning.
– Never immerse the instrument or plug-in power unit in water or other liquids.

9. Accessories and replacement parts

Replacement parts and wearing parts are available from the corresponding
service address (according to the service address list). Please state the corre-
sponding order number.
Sapphire cone
Felt cone
Fine sapphire wheel
Cylindrical cutter
Flame-shape cutter
Round sapphire cutter
Nail cutter
Long sapphire cone
Coarse sapphire wheel
Holder for sandpaper attachment
10 disposable attachments
L – Protective cap for nail dust
Prevents nail dust from escaping.
22
163.517
163.518
163.519
163.520
163.521
163.522
163.523
163.524
163.525
163.526
163.527