Automatic Switch-Off; Switching Off; Cleaning And Maintenance; Storage - Beurer HK 25 Gebrauchsanweisung

4.5 Automatic switch-off

This heat pad is equipped with an automatic switch-off function. This turns off the heat sup-
ply approx. 90 minutes after the initial use of the heat pad. The temperature setting display
then starts to flash. So that the heat pad can be switched back on, the slider for ON/OFF and
temperature settings (5) must first be set to setting "0" (OFF). After about 5 seconds it is pos-
sible to switch it on again.

4.6 Switching off

To switch the heat pad off, set the slider for ON/OFF and temperature settings to setting "0" (OFF). The
temperature settings are then no longer illuminated.
NOTE:
If the heat pad is not in use, switch the side slider for ON/OFF to setting "0" (OFF) and unplug the power
plug from the socket. Then disconnect the control from the heat pad by unplugging the plug-in coupling.

5. Cleaning and maintenance

WARNING
Before cleaning, always remove the power plug from the socket first. Then disconnect the control from
the heat pad by unplugging the plug-in coupling. Otherwise there is a risk of electric shock.
CAUTION
The control must never come into contact with water or other liquids, as this may cause damage.
• To clean the control, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
• The textile cover can be cleaned in accordance with the symbols on the label and must be removed from
the heat pad prior to cleaning.
• To clean the plastic protective cover on the heat pad, use a damp cloth.
CAUTION
Please note that the actual heat pad may not be machine-washed, spun or machine dried, chemically
cleaned, wrung out, pressed or ironed. Otherwise the heat pad may be damaged.
WARNING
Never switch the heat pad on to dry it! Otherwise there is a risk of electric shock.

6. Storage

If you do not plan to use the heat pad for a long period of time, we recommend that you store it in the original
packaging. For this purpose, disconnect the control from the heat pad by unplugging the
plug-in coupling.
CAUTION
Please allow the heat pad to cool down before storing. Otherwise the
•
heat pad may be damaged.
To avoid sharp folds in the heat pad, do not place any objects on top
•
of it while it is being stored.
14
90
min
STOP