Cleaning And Maintenance - Klarstein Windsurfer Bedienungsanleitung

EN
22

CLEANING AND MAINTENANCE

Before cleaning
• Turn off the appliance and unplug it form the wall outlet to avoid electric shock or
mechanical damage.
• Use a commercially available cleaning agent and a soft brush for cleaning. Do not
use chemical cleaners.
• Make sure that no water gets onto the control panel.
Cleaning the surface
• For slight dirt on the surface, wipe it off with a soft damp cloth. For greasy dirt, add
a little mild detergent to the cloth, and then wipe the dirt off.
• Do not use water, as it could penetrate the unit and damage the electronics.
• Do not use corrosive cleaning agents or solvents.
• Let the appliance dry completely before putting it back into operation.
Cleaning the filtration mesh
1. Remove plug from wall outlet.
2. Catch the filtration mesh handle and pull upwards (see figure 3).
3. Clean the filtration mesh with a mild detergent and a soft brush.
4. Make sure the filtration mesh is completely dry before installing.
Note: After long time operation, the filtration mesh becomes clogged with dust and
dirt, which will greatly affect the unit's performance. It is recommended to clean the
filtration mesh frequently.