Klarstein Windsurfer Bedienungsanleitung Seite 19

Notes on fi lling the water tank
• The water level must be lower than the MAX mark (see fi gure 2). Make sure the
fl oater is high enough to activate the pump.
• After some time of operation, dust and dirt may occur in the water tank. It is
recommended to change the water fi lter and to clean the water tank frequently.
Switch on the appliance
1. Plug the mains plug into the socket.
2. Turn on the power switch which is at the side of the unit. A small beep sound can be
heard and the power indicator will be on.
WARNING
Risk of electric shock! Make sure that the mains plug is plugged into the
socket correctly. Unplug the appliance from the wall outlet before
moving it. Do not touch the power plug with wet hands.
Operation
• ON/OFF: Press this button once to make the unit ready for working. Press this
button again to turn the unit OFF.
• SPEED: Press this button to select desired fan speed, the LED light on the display will
be on in turn. The numbers next to the lights indicate the speed (1, 2, 3).
• MODE: Press this button to select the desired fan mode, it operates according to the
preset program, alternating between different fan speeds. The LED will be on with
the according mode in turn: Sleep > Natural > Normal.
Figure 2
EN
19