Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - Sony STR-DE475 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für STR-DE475:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Specifications

Amplifier section
POWER OUTPUT
Rated Power Output at Stereo mode
(8 ohms 1 kHz, THD
0.7%)
80 W + 80 W
Reference Power Output
(8 ohms 1 kHz, THD
0.7%)
Front: 80 W/ch
Center: 80 W
Surround: 80 W/ch
Frequency response
MULTI CH IN, CD, MD/
TAPE, DVD/LD, TV/
SAT, VIDEO:
20 Hz - 20 kHz
0/–0.5 dB (sound field
and tone bypassed)
Inputs (Analog)
MULTI CH IN, CD,
DVD/LD, MD/TAPE,
TV/SAT, VIDEO:
Sensitivity: 250 mV
Impedance: 50
kilohms
a)
S/N
: 85 dB (A, 250
b)
mV
)
a) INPUT SHORT
b) Weighted network, input level
Inputs (Digital)
DVD/LD (coaxial):
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB (A, 20
kHz LPF)
TV/SAT (optical):
Sensitivity: –
Impedance: –
S/N: 100 dB (A, 20
kHz LPF)
Outputs
MD/TAPE (OUT);
VIDEO (AUDIO
OUT):
Voltage: 250 mV,
Impedance: 10
kilohms
46
GB
SUB WOOFER:
Voltage: 2 V
Impedance: 1
kilohms
PHONES:
Accepts low- and
high-impedance
headphones
TONE
±6 dB at 100 Hz and
10 kHz
Sampling Frequency
48 kHz (OPTICAL IN)
96 kHz (COAXIAL IN)
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Intermediate
10.7 MHz
frequency
Sensitivity
Mono: 18.3 dBf, 2.2 µV/
75 ohms
Stereo: 38.3 dBf, 22.5
µV/75 ohms
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz - 15 kHz +0.5/–2
dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
531 - 1602 kHz
Antenna
Loop antenna
Intermediate
450 kHz
frequency
Usable sensitivity
50 dB/m (at 999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz: 35 dB
Video section
Inputs
Video: 1 Vp-p 75 ohms
Outputs
Video: 1 Vp-p 75 ohms
General
System
Tuner section:
PLL quartz-locked
digital synthesizer
system
Preamplifier section:
Low-noise NF type
equalizer
Power amplifier section:
Pure-complementary
SEPP
Power requirements
230 V AC, 50/60 Hz
Power consumption
175 W
In Standby
Condition: 1 W
430 × 297 × 145 mm
Dimensions
including projecting
parts and controls
Mass (Approx.)
7.2 kg
Supplied accessories
See page 4.
Design and specifications are subject to
change without notice.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis