Leuze electronic ODS 9 Bedienungsanleitung Seite 19

Foreseeable misuse
Any use other than that defined under "Intended use" or which goes beyond that
use is considered improper use.
In particular, use of the device is not permitted in the following cases:
– in rooms with explosive atmospheres
– as stand-alone safety component in accordance with the machinery directive
Use as safety-related component within the safety function is possible, if the
component combination is designed correspondingly by the machine manu-
facturer.
– for medical purposes
NOTICE
Ä
Observe the safety notices on intended use and foreseeable mis-
use in the operating instructions for the sensor.
NOTICE
Do not modify or otherwise interfere with the device!
Ä
Do not carry out modifications or otherwise interfere with the de-
vice. The device must not be tampered with and must not be
changed in any way.
Ä
The device must not be opened. There are no user-serviceable
parts inside.
Ä
Repairs must only be performed by Leuze electronic GmbH + Co.
KG.
Competent persons
Connection, mounting, commissioning and adjustment of the device must only be
carried out by competent persons.
Prerequisites for competent persons:
– They have a suitable technical education.
– They are familiar with the rules and regulations for occupational safety and
safety at work.
– They are familiar with the operating instructions for the device.
– They have been instructed by the responsible person on the mounting and
operation of the device.
Certified electricians
Electrical work must be carried out by a certified electrician.
Due to their technical training, knowledge and experience as well as their familiar-
ity with relevant standards and regulations, certified electricians are able to per-
form work on electrical systems and independently detect possible dangers.
In Germany, certified electricians must fulfill the requirements of accident-preven-
tion regulations DGUV (German Social Accident Insurance) provision 3 (e.g. elec-
trician foreman). In other countries, there are respective regulations that must be
observed.
EN
19