Ayce GH-05 Gebrauchsanweisung Seite 30

1. Week as a unit, the operation mode can be set in one working hours per day
from Monday to Sunday.
2. When the working procedure is set and saved, the product will operate in a
standby program scheduled weekly cycle.
3. Manual mode is not available for programming mode working time.
In Standby mode, Press for 3 seconds, and icon
the programming setting is done.
Set waked up time and temperature:
Press for 3 seconds ,the day icon (1 2 3 4 5 6 7) flashes, use + and - to set
current day.The current day and ON flashes icon (first use, the time display OFF.
Press ,the time become and can set).Press OK to wake up time setting,
the hour will flash, use + and - to the 24-hours setting. Then press OK and to minute
flashes. Use + and – to set minute. Then press OK
setting, the minute icon
and to temperature setting, setting temperature flashes 20°C (default temperature
setting is 20°C), use + and - to set(selected temperature range 5°C - 40°C). Press
OK to OFF time setting,the icon ON light off and icon OFF flashes use + and - to the
24-hours setting. Then press OK and to minute setting, the minute icon
Use + and – to set minute. Press OK to confirm and automatically enter to next
working period. In this cycle, you can set 7 days on/off timer.
Remarque:
1. The standby in programming mode, the icon
shows room temperature, the time bar shows local time and ON time.
2. The operating mode in programming mode, the icon
bar shows room temperature and set temperature, the time bar shows local
time / ON time / OFF time.
3. If the product enters the manual mode in the standby mode of the
programming mode, the icon and
setting temperature of the manual mode, the time bar shows local time.
4. During the programming cycle, press
then automatically run the programming mode until the next working day.
flashes on the screen until
flashes.
flashes, the temperature bar
flashes, the temperature
flashes,the temperature bar shows the
to close the programming mode, and
MAINTENANCE
1. Always disconnect the appliance and let it completely cool before any
maintenance.
2. Use a vacuum cleaner to remove dust on inlet and outlet surfaces.
3. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth.
Never immerse the unit in water, nor let water drip into the unit.
STORING
1. Always disconnect the appliance, let it completely cool and clean it before storing.
2. If you do not use the device for a long period, put back the unit and the instruction
manual to the original carton and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during storing as this may damage
the appliance.
58 | 59
GB