Herunterladen Inhalt Inhalt Diese Seite drucken

Ayce GH-05 Gebrauchsanweisung Seite 27

Vorschau ausblenden Andere Handbücher für GH-05:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6.
In order to avoid overheating, do not cover the heater.
7.
Do not use this heater in the immediate surroundings
of a bath, a shower or a swimming pool.
8.
Make sure the voltage is the same as that indicated
on the rating plate of the appliance.
9.
Do not operate this appliance if the cable or plug
becomes damaged.
10.
Keep the appliance and cable away from sources of
heat, sharp objects or anything that might cause
damage.
11.
Ensure the appliance is always switched off before
connecting it to the mains power supply.
12.
Switch off the power supply and unplug the appliance
whenever it is not in use, before cleaning it or carrying
out any maintenance.
13.
To disconnect the appliance, switch it "OFF", and
then remove the plug from the socket. Do not pull
the cable to unplug it.
14.
Do not operate in areas where petrol, paint or other
flammable liquids are used or stored.
15.
For indoor use only.
16.
To prevent a possible fire hazard, do not block the air
intakes or outlet in any way.
17.
Do not touch the hot surfaces.
18.
Do not insert or allow any foreign object to enter any
intake or outlet opening, as this may cause an electric
shock, fire or damage to the appliance.
19.
Always ensure that your hands are dry before
operating or adjusting any switch on the product or
touching the plug and socket.
20.
Do not leave this appliance unattended when it is in
use.
21.
The most common cause of overheating is deposits
of dust or fluff in the appliance. Ensure these
deposits are removed regularly by disconnecting the
appliance and then vacuum cleaning air vents and
grills.
22.
Do not put the heater away until it has cooled down.
Store the heater in cool dry location when not in use.
23.
WARNING: In order to avoid a hazard for very young
children, this appliance should be installed so that
the lowest heated rail is at least 300 mm above the
floor.
24.
Appliance is to be supplied through a residual current
device (RCD) having a rated residual operating current
not exceeding 30 mA.
25.
WARNING: The heater must not be used if the glass
panels are damaged.
52 | 53
GB

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis