AUX ALMD-NHA Serie Benutzer- Oder Installationshandbuch Seite 91

The setting of "Mildew-proof" function
Mildew-proof function: After shutdown, the air conditioner would automatically
dry the moisture in the evaporator of indoor unit, so as to avoid mildewing.
Enter mildew-proof function:
1.Under COOL and DRY mode, press "Function" button to enter the interface of
function selection.
2.Press " " or "
interface,at this moment, icon "
3.Press "Function" button again to enter mildew-proof function, icon"
TIMER FAN SWING MODE
FUNCTION ON/OFF
C
Set Temp.
Cancel fungus-proof function:
1.When mildew proof function is ON, press "Function" button to enter the
interface of function selection.
2.Press " " or "
3.Press "Function" button again to cancel mildew proof function,icon will "
disappear.
TIMER FAN
FUNCTION
Set Temp.
The setting of "Light Sensation" function
Light sensation function: Detect the On and Off of indoor lamplight and switch
to low fan speed when the lamplight is off, which can reduce the noise and
create a comfortable sleep environment for users.
Enter light sensation function:
1.In the state of running, press "Function" button to enter the interface of
function selection.
2.Press " " or "
flashing;
3.Press Function button again to enter light sensation function, at this " "
moment, icon"
4.Whenlight sensation function is on, if the indoor lamplight is OFF and lasts
for 20minutes, the unit will automatically enter sleep mode. If the indoor
lamplight is ON, and lasts for 20 minutes, the unit willcancel sleep mode
and run according tothe setting fan speed.
" button to switch to the mildew-proof function setting
" is flashing;
Sleep
Set Temp.
TIMER FAN
FUNCTION
" button to mildew proof function, icon "
SWING MODE
ON/OFF
C
" to switch to light sensation function, icon "
" is lighting.
91
C
TIMER
Eco
FUNCTION
Set Temp.
SWING
MODE
ON/OFF
Sleep
Set Temp.
TIMER FAN
FUNCTION
"is lighting.
FAN SWING MODE
ON/OFF
Sleep
C
Eco
" is flashing;
"
C
Eco
SWING MODE
ON/OFF
" is