AUX ALMD-NHA Serie Benutzer- Oder Installationshandbuch Seite 87

3.For the unit has the functions of left and right swing and up and down swing:
Press Swing button, the swing mode will switch in the following cycle order:
" "
" Up and Down Swing On
" Up and Down Swing OFF
" Left and RightSwing On
"Timing" function
Users can set shutdown timing time when the unit is running, and set
starting-uptimingtime when the unit is standby.
1.Press Timer button when the unit is running, the wired controller will display " "
" " and users can set the shutdown timing time; when the unit is
Time off
standby, the wired controller will display"
starting-up timing time.
C
Room Temp.
C
Set Temp.
2.After entering timing time setting interface, the default timing time is 0.5H, at
this moment, press "
button is not pressed for 10 seconds, the timing setting will be canceled, and
then return to the state of non-timing.
Time off
C
Room Temp.
Time on
C
Set Temp.
3.After the setting of timing, press "Timer" button again to confirm. The timing
setting is successful and the time bar will stop blinking.
Time off
C
Room Temp.
Time on
C
Set Temp.
"
" Up and Down & Left and RightSwing OFF
"
" Up and Down & Left and RightSwing On
→
"
" Left and RightSwing OFF
Time on
TIMER FAN SWING
FUNCTION
" or " " button to regulate the timing time. If the
TIMER FAN SWING
FUNCTION
TIMER FAN SWING
FUNCTION
87
"
",and users can set the
Time off
Room Temp.
MODE
Time on
ON/OFF
Set Temp.
Time off
Room Temp.
MODE
Time on
ON/OFF
Set Temp.
Time off
Room Temp.
MODE
Time on
ON/OFF
Set Temp.
"
"
C
C
C
C
C
C