AUX ALMD-NHA Serie Benutzer- Oder Installationshandbuch Seite 89

3.Press Function button to confirm turbo function, at this moment, icon " "
" " , fan speed display is (
TIMER FAN SWING MODE
FUNCTION ON/OFF
C
Set Temp.
Turbo
Cancel turbo function:
1.When turbo function is opened, press "Function" button to enter the
interface of function selection.
2.Press " " or "
flashing, press Function button to cancel strong function, and strong icon "
would not display.
TIMER FAN
FUNCTION
Set Temp.
Note: The unit without turbo function can also set turbo function on the wired
controller, the performance is high fan speed, but "
icon do will not display.
The setting of "Sleep" function
Sleep function: Make indoor unit will run according to pre-set sleep temperature
curve, which creates a comfortable sleep environment and improves sleep
quality.
Enter sleep function:
1.In the state of running, press "Function" button to enter the interface of
function selection.
2.Press " " or " " button to switch to sleep function, "
at this moment
3.Press " Function " button to open sleep function, at this moment, icon
is lighting.
and highest fan speed icon).
Turbo
Sleep
Set Temp.
TIMER FAN
FUNCTION
" switch to strong function, at this moment, icon
"
SWING MODE
ON/OFF
C
89
C
TIMER
Eco
FUNCTION
SWING MODE
ON/OFF
Set Temp.
Turbo
TIMER FAN
FUNCTION
" icon and "
Sleep
FAN SWING MODE
ON/OFF
Sleep
C
Set Temp.
Eco
" " is
Sleep
C
Eco
SWING MODE
ON/OFF
"
Turbo
"icon is flashing
Sleep