AUX ALMD-NHA Serie Benutzer- Oder Installationshandbuch Seite 86

C
Set Temp.
Under COOL, DRY, and HEAT modes, the setting temperature range is
16 ℃ ~ 32 ℃;
The controller will display" Set temp." to show the setting temperature;
2.Under the function selection mode, press"
function;
3.Under the timing mode, press"
Mode setting
When the unit is running, press "MODE" button, the running mode will switch
according to the following order:
AUTO
The initial setting temperature for each mode is 24 ° C, and there is no
temperature setting and automatic wind under FAN mode.
The setting of "Wind speed"
When the unit is running, press "Fan" button to switch fan speed in the
following order:
3-gear of fan speed:
4-gear of fan speed:
Auto
(Low)
In turbo mode, display fan speed (turbo + highest fan speed icon).
The setting of "Swing"
1.For the unit only has the function of up and down swing:
when the unit is running, press "Swing" button to enter or cancel up and down
swing. At the time of opening up and down swing,"
of closed, swing icon will disappear.If the unit has positioning swing function,
press "Swing" button to regulate the swing angle in the order:
→ → → → → →
2.For the unit only has the function of left and right swing:
when the unit is running, press "Swing" button to enter or cancel left and right
swing. At the time of opening left and right swing,"
closed, swing icon will disappear. If the unit has positioning swing function,
press "Swing" button to regulate the swing angle in the order:
→ → → → → →
TIMER FAN SWING
FUNCTION
Set Temp.
" or "
COOL DRY FAN HEAT
Auto
(Low)
(Medium) (High)
86
Set Temp.
MODE
ON/OFF
C
TIMER
FUNCTION
" or " "button to select a
"button to setting time.
AUTO
(Medium) (High)
(Super-high)
" is lighting. At the time
cancel up and down swing
" is lighting. At the time of
cancel up and down swing
C
FAN SWING MODE
ON/OFF
Auto
Auto