Function Description - AUX ALMD-NHA Serie Benutzer- Oder Installationshandbuch

4.After the setting "Timer On"function, you can adjust the fan speed, running
mode, set temperature, and swing angle. If there is no operation for 10
seconds, standby screen will be displayed.
Time on
C
Set Temp.
TIMER FAN SWING MODE
FUNCTION ON/OFF
Time on
C
Set Temp.
5.Timing range: 0.5～24 hours.
press " " or "
0.5 hours.When the timing time is more than 10 hours, press "
button once, the timing time will increase or decrease by1 hour.
6.Press "Timer" button or "ON / OFF" button to exit TimerON or TimerOFF.

Function description

The wire controller is for the general-purpose, specific functions fo the
controller are subject to the functions of your air conditioning unit.
Note: In the interface of function setting, press any button such as
Timer, Fan, Swing, Mode, ON/OFF, and Comfort to exit the interface and
conventional operation interface will display. If there is no operation
for 10S, you can exit the interface.
Enter function: Press function button to enter function selection interface ,
press " " or "
flash, press "function" button again to confirm the function.
Cancel function: Press function button to enter function selection interface,
press" " or " " to select a function and the corresponding icon will flash,
press "function" button again to cancel the function.
The setting of "Turbo" function
Turbo function: The fan speed will be ultra-high in turbo mode and users can
achieve rapid cooling or heating effect.
Open turbo function:
1.When the unit is running in cooling or heating mode, press "Function" key
to enter the interface of function selection.
2.Press " " or "
" " icon is flashing.
TIMER FAN
FUNCTION
Time on
Set Temp.
Time on
Room Temp.
"button once, the timing time will increase or decrease by
" to select a function, and the corresponding icon will
" button to switch to turbo function, at this moment,
SWING MODE
ON/OFF
C
FUNCTION
C
88
Time on
C
Set Temp.
TIMER FAN SWING MODE
ON/OFF
" or " "