Herunterladen Diese Seite drucken

Use Precautions - air&me LARY Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für LARY:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Air outlet
1
6
Digital display
2
7
ON/OFF button
3
8
4
9
Air inlet
5
10
DIGITAL DISPLAY (SEE PAGE 2)
Hygrosmart
®
Function
A
Clothes dryer mode
B
Night mode
C
Negative ionisation function
D
"Full tank" alert
E

USE PRECAUTIONS

• Make sure the product is placed on a dry, level surface.
• Leave at least 50 cm space behind, on the sides and in front of the unit.
OPERATING INSTRUCTIONS
1. Plug the appliance.
2. Press the ON/OFF button:
rate of the room air.
• Lary automatically starts in
3. Press ON/OFF twice to select
4. Press ON/OFF a third time to select
5. Press ON/OFF for a long time to turn the appliance off. The fan will stop after 30 seconds.
12
Continuous drainage outlet
Tank
Tank handle
Multidirectional casters
Continuous drainage hose
Display of the humidity rate of room air:
F
• Between 40 and 60%, the display is green to
indicate an ideal humidity rate.
• Below 40%, the display is blue to indicate a too
dry air.
• Above 60%, the display is red to indicate a too
humid air.
®
FUNCTION.
.
.
®
FUNCTION: This mode enables you to maintain, at maximum speed, an ideal
A
humidity rate in the air (between 47% and 53%).
In "clothes dryer" mode, the appliance works at maximum speed
B
until the air humidity is equal to 20%. It is the perfect mode for laundry drying which needs
significant air dehumidification.
Identical to the Hygrosmart
C
the humidity rate of your room between 47% and 53%. However, the appliance works more
quietly, at low speed, and it does not produce sound signal once the tank is full.
NEGATIVE IONISATION FUNCTION: This function automatically starts when you turn the appliance
D
on. It enables to clean the air and eliminate bad smells, thanks to the diffusion of negative ions.
TANK DRAIN (SEE PAGE 3)
The appliance produces a sound signal once the tank is full. The
E
appliance turns off and the indicator becomes red. To empty the tank:
Turn off the appliance and pull out the tank using the handle provided.
1
Drain the condensate.
2
Reposition the tank.
3
Press the ON/OFF button and choose the desired operating mode.
4
The dehumidifier is equipped with a tank positioning sensor. As a matter of security, the product
turns off if the tank is missing or not properly placed.
ADDITIONAL FUNCTIONS (SEE PAGE 3)
CONTINUOUS DRAINAGE: Thanks to the continuous drainage hose, the appliance will work
independently without having to empty the tank. Make sure the hose is not bent and that it is
placed on a downward slope so that water can easily drain away. Do not modify or extend
the drainage hose.
Remove the tank.
1
Connect the drainage hose.
2
Pass the hose through the opening provided for this purpose before repositioning the tank.
3
function if the ambient temperature is between 5°C and 15°C. Every now and then, the
compressor stops but the fan continues to work.
®
function, this mode enables you to maintain
The appliance automatically enters in defrost
13

Werbung

loading