Main Functions; Use Precautions - air&me EVEL Bedienungsanleitung

COMPONENTS (SEE PAGE 2)
Handle
1
Digital display
2
Air outlet
3
Continuous drainage hole
4
Water tank lid
5
Float
6
DIGITAL DISPLAY (SEE PAGE 3)
ON/OFF button
A
"In process" luminous indicator
B
"Full tank" luminous indicator
C
"Speed" button
D
"Timer" button
E

USE PRECAUTIONS

• Make sure that the product is placed on a dry flat surface.
• Leave at least 50cm behind, around and in front of the appliance.
• Make sure the removable filter and the tank are properly positioned and pushed in.
• Do not remove the float from the tank because it will prevent the appliance from starting.
OPERATING INSTRUCTIONS
1. Plug the appliance.
• All luminous indicators of the control panel light for 1 second and then turn off.
• At the same time, the appliance produces 3 sound signals.
• When the appliance operational, the "Power" luminous indicator turns red.
2. Press the ON/OFF button ( ) to turn the appliance on. The movable flap opens.
A
3. Press the ON/OFF button (A) again to turn the appliance off.
• The "Power" luminous indicator turns red and the other luminous indicators turn off.
• The appliance continues to ventilate the air during 4 minutes after being turned off, then
the movable flap comes back to its initial position and the appliance stops completely.
Useful: the appliance retains the last settings from one use to another.
12
Water tank
7
Filling the tank indicator
8
Removable filter
9
Air inlet
10
Built-in hygrometer
11
Electric cable
12
"Humidity" button
F
"HygroSmart " luminous indicator
®
G
"Clothes dryer" button
H
"Movable flap" button
I

MAIN FUNCTIONS

"SPEED" BUTTON: By pressing this button several times, you can adjust the air flow produced
D
by the appliance, selecting one of the three modes: LOW (low air flow), MED (medium air
flow) or HIGH (strong air flow).
"TIMER" BUTTON: By pressing this button several times, you can select the operating time: 2
E
hours, 4 hours or 8 hours. By pressing it one more time, you can cancel the Timer function and
choose to let the appliance work continuously.
"HUMIDITY" BUTTON: By pressing this button several times, you can choose the humidity rate
F
between three options: HygroSmart®, 60 % or 70 %.
• The HygroSmart function ( ) enables you to maintain an ideal humidity rate in the air
®
G
(between 40% and 60%). The indicator light flashes if the humidity level in the ambient air is
already below 40%.
• Adjust the appliance on 60% if you want to use it in a cellar.
• Adjust the appliance on 70% if you want to use it in a wine cellar.
When the ambient air humidity is inferior to the preset humidity rate, the appliance stops
working. When the ambient air humidity is superior to the preset humidity rate, the appliance
turns on again automatically.
It is possible to combine these three modes at the same time: choice of speed, choice of
dehumidification time and choice of humidity rate.
"CLOTHES DRYER" BUTTON: By pressing this button, the appliance works at maximum speed.
H
It is possible to adjust the Timer and to define the desired humidity rate but it is not possible
to adjust the speed.
If you do not adjust the Timer, the appliance will work for 10 consecutive hours, will stop half
an hour to avoid overheating and then will automatically restart.
"MOVABLE FLAP" BUTTON: Thanks to this button, you can control the switching on and the
I
stop of the movable flap. By pressing this button, the flap opens automatically. You can
adjust the opening angle of the flap by pressing it a second time. The movable flap can be
opened up to an angle of 90°.
EMPTYING THE TANK (SEE PAGE 3)
The appliance automatically stops working once the tank is full and the "Full" indicator (
If you had set the Timer, the appliance retains the remaining operating time. After having emptied
the tank, the appliance resumes the current program.
Turn the appliance off and pull the tank.
1
Unclip the water tank lid.
2
Empty the condensates.
3
Replace the tank lid and then replace the tank. Then, press the ON/OFF button and choose
4
the desired operating mode.
The dehumidifier is equipped with a tank positioning sensor. As a matter of security, the product
turns off if the tank is missing or not properly placed and the "Power" and "Full" indicators light.
) lights.
C
13