Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
COMPONENTS (SEE PAGE 2)
Handle
1
Digital display
2
Air outlet
3
Continuous drainage hole
4
Water tank lid
5
Float
6
DIGITAL DISPLAY (SEE PAGE 3)
A
"In process" luminous indicator
B
"Full tank" luminous indicator
C
D
E
USE PRECAUTIONS
• Make sure that the product is placed on a dry flat surface.
OPERATING INSTRUCTIONS
1. Plug the appliance.
• All luminous indicators of the control panel light for 1 second and then turn off.
• At the same time, the appliance produces 3 sound signals.
• When the appliance operational, the "Power" luminous indicator turns red.
A
• The "Power" luminous indicator turns red and the other luminous indicators turn off.
Useful: the appliance retains the last settings from one use to another.
12
Water tank
7
Filling the tank indicator
8
9
Air inlet
10
Built-in hygrometer
11
12
F
"HygroSmart
®
" luminous indicator
G
H
I
MAIN FUNCTIONS
"SPEED" BUTTON:
D
flow) or HIGH (strong air flow).
"TIMER" BUTTON:
E
hours, 4 hours or 8 hours. By pressing it one more time, you can cancel the Timer function and
choose to let the appliance work continuously.
"HUMIDITY" BUTTON:
F
• The HygroSmart
®
function (
)
G
• Adjust the appliance on 60% if you want to use it in a cellar.
• Adjust the appliance on 70% if you want to use it in a wine cellar.
sethumidity level, the appliance automatically restarts dehumidifying.
It is possible to combine these three modes at the same time: choice of speed, choice of
dehumidification time and choice of humidity rate.
"CLOTHES DRYER" BUTTON:
H
to adjust the speed.
If you do not adjust the Timer, the appliance will work for 10 consecutive hours, will stop half
an hour to avoid overheating and then will automatically restart.
"MOVABLE FLAP" BUTTON:
I
opened up to an angle of 90°.
EMPTYING THE TANK (SEE PAGE 3)
The appliance automatically stops working once the tank is full and the "Full" indicator (
If you had set the Timer, the appliance retains the remaining operating time. After having emptied
the tank, the appliance resumes the current program.
Turn the appliance off and pull the tank.
1
Unclip the water tank lid.
2
Empty the condensates.
3
4
the desired operating mode.
The dehumidifier is equipped with a tank positioning sensor. As a matter of security, the product
turns off if the tank is missing or not properly placed and the "Power" and "Full" indicators light.
) lights.
C
13
Werbung
Inhaltsverzeichnis
