Fitting And Adjustment - Sony DXBK-701 Bedienungsanleitung

Fitting and Adjustment

Power off the CCU-TX7/TX7P before fitting the board.
1
2
Check that the switches on the DXBK-701 board (SDI-44)
are set as follows.
FREE LOCK: LOCK
ADJ OPE: OPE
AUDIO MODE: normally 2CH; 4CH if the connected
device does not support 2CH mode. (No audio output is
provided on channels 3 and 4.)
FREE LOCK
FREE LOCK
Loosen the two screws at the right end of the front panel of
the CCU-TX7/TX7P, and open the front panel. Remove
the board retainer (two screws).
ADJ OPE
ADJ OPE
4ch 2ch
AUDIO MODE
Board retainer
(Continued)
13