Performing A Hotsync Operation For The Second Time And Thereafter - Sony PEGA-MSB1 Bedienungsanleitung

Performing a HotSync Operation for the Second
Time and Thereafter
Once you have bonded your Bluetooth compatible computer to your
CLIÉ handheld, following the instructions described in "Performing a
HotSync Operation by Bluetooth Communications for the First Time"
on pages 14-19, you can perform a HotSync operation easily from the
second time.
If you try to perform a HotSync operation with an unauthorized
Bluetooth compatible computer, follow the Procedures 1 and 2 of
"Performing a HotSync Operation by Bluetooth Communications for
the First Time" on pages 14-19.
1
Make the following preparations.
•Insert this Bluetooth Module in your CLIÉ handheld.
•Turn on the power of your computer and activate Bluetooth
communications.
2
Tap the [HotSync] icon on the home screen of your CLIÉ
handheld.
The [HotSync] screen appears.
3
Tap the
A HotSync operation starts.
When this operation ends, a message appears indicating that the
HotSync Operation is completed.
If you cannot perform a HotSync operation following the
instructions in "Performing a HotSync Operation for the Second
Time and Thereafter"
Perform bonding again to authorize your Bluetooth compatible
computer as a communication device, following the instructions in
"Performing a HotSync Operation for the First Time" on pages 14-19.
20 GB
icon.