Simons Voss Technologies 3068 Kurzanleitung Seite 25

: : Add without new person
: : Without user (select none)
: : Assign transponder group (in a))
These transponders can then be programmed into the corresponding lock device in
advance. When new users for the lock device are to use the pin code terminal, they
can use these transponders.
7.0 OPERATING TYPE MODES
Three different programming modes are available for the pin code terminal:
1. Knowledge mode (PIN)
2. Knowledge-possession mode with flexible PIN
Verification -> Transponder / smart card + PIN
3. Knowledge-possession mode with fixed PIN
Verification -> Transponder / smart card + PIN
Only one of the operating modes may be used per locking system. You will find more
detailed information on Modes 2 and 3 (verification) in the manual.
7.1 KNOWLEDGE MODE
In knowledge mode, a door can be opened when the correct PIN is entered. There is
no need for an additional transponder.
However, the user must be added as a „PIN code user" in the software in order to
receive a TID!
7.1.1 USER PIN FORMAT
The user PIN consists of a variable and a fixed part:
User PIN = User PINvariable + TID (5 digits)
Users can choose the user PINvariable themselves as only the length is specified; they
25