Specifications - Makita HP330D Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Battery cartridge
1-2. Button
2-1. Switch trigger
3-1. Lamp
4-1. Reversing switch lever

SPECIFICATIONS

Capacities
-1
No load speed (min
Blows per minute (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone. It is also suitable for screw driving and drilling
without impact in wood, metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
5-1. Speed change lever
6-1. Action mode changing ring
6-2. Arrow
7-1. Adjusting ring
7-2. Graduation
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
)
Low (1)
High (2)
-1
)
Low (1)
Overall length
Net weight
Rated voltage
) : 82 dB(A)
pA
) : 93 dB(A)
WA
2
) : 9.5 m/s
h,ID
2
2
) : 2.5 m/s or less
h,D
2
ENE079-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
ENG905-1
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
ENG900-1
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
3
7-3. Arrow
8-1. Sleeve
10-1. Blow-out bulb
12-1. Holster holder
12-2. Waist belt
HP330D
8 mm
10 mm
21 mm
5.1 mm x 63 mm
M6
0 - 1,500
0 - 400
0 - 22,500
0 - 6,000
201 mm
1.1 kg
D.C. 10.8 V
ENG901-1