List Of Pictograms Used; Introduction; Intended Use; Parts Description - LIVARNO LUX LSL 32 A2 Bedienungs- Und Sicherheitshinweise

List of pictograms used / Introduction

List of pictograms used

Read the instructions!
Observe the warnings and safety in-
structions!
For your safety
Safety class I
30 W LED Spotlight

Introduction

We congratulate you on the purchase of
your new product. You have chosen a
high quality product. The instructions for
use are part of the product. They contain important
information concerning safety, use and disposal.
Before using the product, please familiarise your-
self with all of the safety information and instruc-
tions for use. Only use the product as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.

Intended use

This spotlight is suitable for indoor and outdoor use.
The light can be fastened to any normally inflam-
mable surface. Do not use the light in water. Only
have the installation performed by an authorised
electrician. Any use other than that described above
or any modification of the product is not permissible
and will result in damage. The manufacturer is not
liable for damage caused by improper use. The prod-
uct is not intended for commercial use.
6 GB
Danger to life and risk of accidents
for infants and children!
Warning! Danger of electric shock!
Caution! Danger of explosion!
Dispose of the packaging and de-
vice in an environmentally friendly
b manner!
a

Parts description

Screw (cable terminal box)
1
Cable terminal box
2
Wall bracket
3
Adjusting screw (mounting bracket)
4
Locking screw (motion detector)
5
Rotary control SENS (sensitivity)
6
Rotary control TIME (switched on duration)
7
Rotary control LUX (light sensitivity)
8
Motion detector
9
LED light bulb
10
Brown cable
11
Green-yellow cable (protective conductor)
12
Blue cable
13
Transformer (LED converter/ driver)
14
(do not touch)
Cable holder
15
Cable gland
16

Technical Data

Rated voltage: 100–240 V∼, 50 / 60 Hz
Rated power: approx. 30 W
Power factor: > 0.9
Protection class: I /
Protection class: IP 44 (splash-proof)
Detection angle: approx. 180 °
Luminous flux: approx. 2200 lumen
Colour temperature: approx. 5000 Kelvin