Orved Cuisson 31 Bedienungs- Und Wartungsanleitung Seite 2

The vacuum packing machine has been studied and designed to vacuum bags and rigid con-
tainers, with a complete standard cycle (vacuum and seal) being performed every 60 seconds.
It is prohibited to use the appliance in a manner or for a purpose other than those indicated by
Orved S.p.A. in this manual. Proper use of the appliance also includes compliance and aware-
ness of the instructions and warnings contained in this instruction manual, as well as the timely
implementation of all inspections, servicing and cleaning of the appliance.
STRICTly COMPly WITh ThE fOllOWING SAfETy GUIDElINES:
• Before use, make sure the machine is intact and bears no signs of damage.
• If the machine is not used for a long period of time, it must be switched off from the main
switch.
• Prevent unauthorised persons from accessing the work area.
• Use suitable work clothes and protection gloves.
• Never use the machine in potentially explosive environments, or in the presence of flammable
vapours and gas.
• Make sure there is sufficient ventilation in the workplace.
• Immediately remove all obstacles and interference that can compromise safety.
DANGER!
• Only trained personnel can use the machine. Such personnel must be aware of
the safety Standards and User Instructions contained in this manual.
• This machine can be used by children over the age of 8, by persons with redu-
ced physical, sensory or mental capabilities, as well as by persons lacking experience and
expertise who have been given supervision or instructions to ensure safe use of the machine
and after having explained the risk (or dangers) associated with it.
DANGER!
• before every appliance start-up, check that all the protection and safety devices
are present, efficient and functional.
ElECTRICAl RISKS - ElECTRICAl hAZARD
• The electrical safety of the machine is only guaranteed when it is connected
correctly to an efficient earthing system in accordance with the law.
• Only qualified personnel can operate on the power supply system and access
live parts.
• Perform regular inspections of the electrical system of the machine (these are only to be
performed by qualified personnel).
• Remove and/or immediately replace loose connections or burnt wires (only qualified per-
sonnel must replace these parts).
• Replace the power supply cable if damaged. Only qualified personnel must replace this part.
2
Rev. 01 - 03/2018 - Cod. 1500024 - Instruction manual for vacuum chamber packaging machines for vacuum cooking mod.
Cuisson