2.
Compose the picture, then lightly press
the Shutter Release button.
3.
Check that the orange and green LEDs
light up, then shoot.
Both camera and subject be still
The Red-eye Reduction lamp lights up for approx. a second
before the flash fires. Be careful not to move the camera or
let the subject move until the flash fires.
While the orange LED is blinking with the Shutter Release
button pressed lightly, the flash is charging, and the shutter
cannot be released. Release the shutter after the orange LED
lights up.
Red-eye Reduction mode is not automatically canceled by
turning the power off. To cancel the Red-eye Reduction mode,
press the
panel.
button until "
" disappears from the LCD
Advanced Operations
E
27