English (Original Instructions) - DeWalt DCF6201 Übersetzung Der Originalanweisung

COLLATED MAGAZINE ATTACHMENT
DCF6201
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Screw length suitability
Weight
EC-Declaration of Conformity
Machinery Directive
Collated Magazine Attachment
DCF6201
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-2:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
24.08.2018
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.

WALT one of the
e

DCF6201
General Power Tool Safety Warnings
mm 25–57

kg 0.36
Additional Specific Safety Rules for Collated
Magazine Attachment
• The collated magazine is to only be used with the D
DCF620 or DCF621 screwdriver.
• Observe all operating instructions and safety regulations
contained in the manual for the screwdriver the magazine
accessory is used with.
WALT at
e
• Before use, ensure that the magazine accessory is properly
attached to the tool.
WALT.
• Avoid body contact with earthed or grounded surfaces such as
e
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
• Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power
tool accidentally.
• When driving screws, never reach into the magazine
accessory. Keep hands clear of the advancing mechanism and
the spot where the screw is being driven.
• Do not use the magazine accessory as a gripping surface.
• Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the
operator an electric shock.
• Use only screw strips that are suitable to this magazine. Only
insert screw strips when the screwdriver power is off and the
trigger is locked.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
EngLIsh
WALT
e
11