Modster CHARGER 60 Betriebsanleitung Seite 54

User Manual
BATTERY INTERNAL RESISTANCE
The user can check the battery internal resistance, including battery
pack total internal resistance and each cell internal resistance.
Enter into
button, the charger will go into the internal resistance program.
1.Check the battery pack total internal resistance: Only need to connect
the battery to the main port of the charger. If do not connect the battery
to the charger or the battery is defective, it will appear below message:
Otherwise, normally, it will appear below message:
The fully flow chart is as below:
54
MODSTER Charger 60
page, then press the "START/ENTER"
www.modster.at