Modster CHARGER 60 Betriebsanleitung Seite 49

User Manual
CHARGING NIMH/NICD BATTERY IN RE-PEAK CHARGE MODE
Re-peak Charge Mode (NiMH and NiCD batteries only): In re-peak
charge mode, the charger can peak charge the battery once, twice or
three times in a row automatically. This is good for confirming the
battery is fully charged, and for checking how well the battery receives
fast charges. A five minutes cool-off delay occurs after each re-peak
charge. Press START/ENTER button more than 3 seconds to start the
charging.
www.modster.at
The program is for charging of NiMH/NiCD
batteries in auto mode.
You can make it blink in the current field
and press INC. or DEC. to switch mode.
The screen displays real-time charging
status. Press BATT TYPE/STOP button to
stop the process. The audible sound
indicates the end of process.
Re-peak cycle number 1 shows on the
display. Press the START/ENTER button
to make the re-peak cycle number blink
and press INC. or DEC. button to find the
desired number of times to re-peak charge
the battery. Press the START/ENTER button
to confirm selection.
MODSTER Charger 60
49